Kenmark Interiors

Motorized Shades


Motorized roller shades are available as a standalone solution, or as part of a fully automated system with Lutron Hyperion solar-adaptive technology. The precision controlled electronic drive unit (EDU) is housed inside the roller shade assembly, and wired power and communication are provided via low voltage wiring from either a plug-in, junction-box-mounted, or 10-output power supply. Compatible controls include stand-alone and system options; wired or wireless.


Motorized Shade Specs

Motorized Shade Specs


  • Single Fabric Panel: Standard sizes available up to 12 ft
  • (3.66 m) wide and up to 20 ft (6.1 m) tall
  • (Contact Kenmark Interiors if larger sizes are required)

  • Coupled Fabric Panels: Up to 6 coupled panels on a single EDU
  • Programmable Open and Close Limits
  • Hem Bar Speed: 2.7 inches/second (68.6 mm/sec)
  • Sound: 44 dBA measured 3 ft (0.91 m) from the EDU
  • Vertical level adjustment: +/- 1⁄4 in (6 mm)
  • 3/4 in (19 mm) symmetrical light gaps*


  • 4 in (102 mm) Fascia
  • Side Channel
  • Sill Angle
  • 5 in x 51⁄8 in (127 mm x 130 mm) pocket (single-mount)
  • 7 in x 11 in (178 mm x 279 mm) pocket (dual-mount)

Shade Options:

Click here to view the Motorized Shade Options.


Low Voltage Power: Operating voltage: Class 2, 35 V Control system power supply offers (spike and brownout) overvoltage protection (+/- 10% of line voltage) for all devices in the system Power supply provides appropriate Electro Static Discharge (ESD) protection for all devices in the system Power failure protection: Programming will not be lost if power is lost to the drive Power must be derived from a Lutron NEC® Class 2 power source
Flexible Configuration: Digitally assign and reassign shades to controls, groups, and scenes Adjust limits locally via controls on the EDU Remotely adjust limits and grouping via wired controls or Quantum Vue No wired relays or wired group controllers required
System Capacity: System allows for a total of 100 QS devices System allows for a total of 100 QS zones
Environment: Temperature: 32° – 104° F (0° – 40° C) Humidity: 0% – 90%, non-condensing
Precision Control: Preset points can be easily programmed at any position between the open and close limits Shades stop within 1⁄8 in (3 mm) of programmed open, close, and preset positions Intelligent Hem Bar Alignment (IHA): Shades remain within 1/8” alignment when stopped or moving
Controls: Shades can be controlled by built-in shade columns on a GRAFIKEye QS, or by low-voltage seeTouch QS keypads Shades can be controlled by Radio Window sensors when installed as part of a Quantum system Microprocessors are contained in the EDU, GRAFIKEye QS, and seeTouch QS keypads, allowing high level programming from either source All roller shades, GRAFIKEye QS and seeTouch QS keypads are wired together on the same communications link
Integration: EDUs seamlessly integrate with Lutron lighting control, GRAFIKEye QS, without a separate interface Contact closure, RS232, and Ethernet available to integrate with A/V equipment such as timeclocks, security systems, and touch screens